Shamsan N6 CIF Series Manual do Utilizador descarregar pdf (Página 25)

Other channel

synchronization switch to

play when playback

When playing the file, click the number button, system can

switch to the same period of the corresponding channel to

play.

15 Digital zoom

When the system is in full-screen playback mode, left click

the mouse in the screen. Drag your mouse in the screen to

select a section and then left click mouse to realize digital

zoom. You can right click mouse to exit.

2.5 Schedule

Note:

You need to have proper rights to implement the following operations. Please make sure the

HDDs have been properly installed.

After the system booted up, it is in default 24-hour regular mode. You can set record type and

time in schedule interface.

In the main menu, from Setting to Schedule, you can go to schedule menu. See Figure 2-14.

There are total six periods.

z Channel: Please select the channel number first. You can select “all” if you want to set for

the whole channels.

z Week day: There are eight options: ranges from Saturday to Sunday and all.

z Pre-record: System can pre-record the video before the event occurs into the file. The value

ranges from 1 to 30 seconds depending on the bit stream.

z Redundancy: System supports redundancy backup function. You can highlight Redundancy

button to activate this function. Please note, before enable this function, please set at least

one HDD as redundant. (Main menu->Advanced->HDD Management). Please note this

function is null if there is only one HDD and the 64-channel series product max

supports redundancy records from 4 channels.

z Snapshoot: You can enable this function to snapshoot image when alarm occurs.

z Record types: There are four types: regular, motion detection (MD), Alarm, MD & alarm.

z Holiday setting: Click it you can see an interface shown as in Figure 2-15. Here you can set

holiday date. Check the box, it means current channel shall record as your holiday setup.

Please go to the Period interface to set the holiday date record setup.

Please highlight icon

to select the corresponding function. After completing all the setups

please click save button, system goes back to the previous menu.

At the bottom of the menu, there are color bars for your reference. Green color stands for

regular recording, yellow color stands for motion detection and red color stands for alarm

recording. The white means the MD and alarm record is valid. Once you have set to record

when the MD and alarm occurs, system will not record neither motion detect occurs nor the

alarm occurs.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Sem comentários

Shamsan N6 CIF Series Manual do Utilizador Página 25